The 5052 aluminum coil strip is an alloy made up of 2.5 percent magnesium and 0.25 percent chromium. It’s considered to have great workability and weldability. It has medium static and high fatigue strength. The corrosion resistance of this aluminum is very good, especially in marine environments. This metal has excellent thermal conductivity and low density, like with other aluminum alloys. To harden aluminum 5052, cold working can be used. Heat treatment cannot be used to obtain higher alloy strength.
5052 aluminum coil is also an aluminum alloy for can lids, beer with internal pressure, carbonated beverage cans and juice cans without internal pressure, respectively, with 5082 aluminum alloy and 5052 aluminum plate, the materials are first oxidized to improve the adhesion and corrosion resistance of the coating. After the two sides are painted and dried, the can lid is processed.
Typical mechanical properties of 5052 aluminum coil
1, the surface is smooth, no cracks, corrosion spots and traces of nitrate;
2, high fatigue resistance, good plasticity and corrosion resistance;
3, good weldability, poor machinability, polishing;
4, 5052 aluminum coil elongation can reach 12-20%, than the 1060 aluminum plate elongation increased by 200%;
1. The volume of the purchased aluminium coil should be confirmed first, that is to say, the thickness, width and length of the aluminium coil should be known, and the basic unit of calculation should be meters.
2. Calculate the exact price of this type of aluminium coil per ton: the price of aluminium ingot on the same day + the processing cost of the product of the manufacturer
3. Calculate the total weight of aluminium alloy. Total weight of aluminium coil (unit: ton) = length x thickness x width x density of aluminium sheet (2.7) * number of sheets of aluminium sheet
4. Multiply the total weight of aluminium coil by the aluminium coil price per kg, which is the quotation of this aluminum products.
We take 100 pieces of 90 mm thick, 70 mm wide and 2500 mm long aluminium coil as an example. First we calculate the weight of the product: 0.09 x 0.07 x 2.5 x 2.7 x 100 = 4.2525 tons.
If the aluminium ingot price on that day is 19 500 yuan/ton and the processing fee of aluminium coil manufacturer is 6 000 yuan per ton, then the quotation given by aluminium plate manufacturer is (19500+6 000)*4.2525=108 438.7 yuan, which is equal to about 108,000 yuan.
so if you want to know 5052 aluminum coil price, welcome to contact us: email@example.com