Product Brief
Advantages
Technical Parameter
Depending on the type of plate, 1 to 5 bars are arranged next to each other, forming a checked pattern. It is differentiated between 1 bar(diamond), 2 bar, 3-bar and 5-bar patterns.
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Ga |
V |
Each |
Total |
Alu |
1060 |
0.25 |
0.35 |
0.05 |
0.03 |
0.03 |
- |
- |
0.05 |
0.03 |
- |
0.05 |
0.03 |
- |
99.60 |
Alloy |
1050, 1060, 1100, 3003, 3105, 5005, 5052, 5251, 5754, 5454, 5154, 5083, 5086 6061, 6082 |
||
Temper |
H114, H224, H12, H14, H16, H18, H32, H34, H36, H38, T4, T6, F |
||
Surface |
Bright finish, Mill finish |
||
Bar Difference |
Five Bar,checkered,embossed,chequered,Diamond. |
||
Available Dimension |
|||
|
Mill finish Surface |
Bright finish Surface |
|
Thickness (mm) |
1.00---6.50mm |
1.20---6.50mm |
|
Pattern height |
Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm |
Sheet Thickness from 1.0mm to 2.0mm, bar height: 0.50mm |
|
Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm |
Sheet Thickness from 1.0mm to 2.0mm, bar height: 1.00mm |
||
Sheet Thickness above 2.0mm, bar height: 1.50mm |
Sheet Thickness above 2.0mm, bar height: 1.50mm |
||
Width (mm) |
Maximum2600mm |
Maximum2650mm |
|
Length (mm) |
Maximum16000mm |
Maximum16000mm |
|
Paper interleaves |
On request for selected |
On request for selected |
|
Normal size |
1200×2400mm, 1219×2438mm, 1219×3048mm |
1200×2400mm, 1219×2438mm, 1219×3048mm |
Submit your request and get a quote
Welcome to fill in the following form to complete your product requirements, contact number, and email address etc. We will contact you and give you the feedback ASAP.
Contact
7x24 hour service hotline Click
+86-13298327958
sales@mingtai-al.com
Address
No. 6 Changchun Road, High-tech Zone • Zhengzhou • China