8011-H14 Aluminum closure sheet plate manufacturer

1. Stable mechanical properties, low ear making rate, stable below 2%.
2. Good plasticity, can be deep-drawn into 75mm high closures, and there will be no “orange peel” defects after stamping.
3. Better surface quality and uniform fine lines.
4. High thickness accuracy, as low as ±0.005mm.

The 8011-H14 Aluminum closure sheet plate exemplifies superior deep-drawing capabilities, robust strength, minimal ear formation, and exceptional mechanical properties, making it the prime choice for aluminum bottle cap manufacturing. The H14 temper, being the most widely utilized for 8011 aluminum closure plates, signifies its enhanced strength and performance following work hardening. Flait Aluminum utilizes a distinctive rolling process to produce aluminum sheets suited for crafting long-neck wine bottles, intricate deep-drawn decorative bottle caps, and an array of anti-theft closures for beverages, soft drinks, juices, energy bottles, and more. Common applications of this material include the fabrication of ROPP caps, PP caps, anti-theft caps in rolls, aluminum bottle caps, screw caps, tear-off caps, and flip caps. Moreover, 8011 aluminum sheet serves as an optimal material for producing PP caps for whiskey and other beverage bottles, with a thickness range of 0.16-0.25mm, a thickness tolerance of ±0.005mm, a width range of 330-1000mm, a width tolerance of ±1mm, tensile strength of 150-165Mpa, and elongation exceeding 2%.

Specification of 8011-H14 Aluminum Closure Sheet Plate

Chemical Composition of 8011-H14 Aluminum Closure Sheet Plate

Mechanical Properties of 8011-H14 Aluminum Closure Sheet Plate