Embossed Aluminum Jacketing
Thickness:0.3-1.5mm
Application: Industrial insulation jacketing, cover, insulation protective jacketing
Aluminum Jacket Cladding Stucco Embossed Sheet Coil
Stucco Embossed Aluminum Jacketing /Cladding is made out of embossed aluminum metal roll. The inside of the aluminum pipe jacket is coated with a poly moisture retarder that provides an excellent resistance to moisture and has excellent abrasion protection during installation.
The Stucco Embossed Aluminum Jacketing is cut and rolled to fit each size of pipe insulation correctly. Use the chart to determine the size of the jacketing needed for the pipe insulation that you are trying to cover. Aluminum jacketing is good for mechanical abuse and for weathrizing exterior pipes. Aluminum jacketing can be installed with either 1/2" drill screws or banding and seals (fab straps).
The stucco embossed surface texture hides small imperfections and scratches caused by physical damage during or after installation. This finish also reduces reflectivity while still looking very professional. Lastly, the use of stucco embossed finish provides a small increase to the rigidity and strength of the aluminum jacketing.
● Grade: 1006, 1100, 3003, 3105, 5005
● Temper: O, H12, H14, H16, H24, etc.
● Common use: 3003 H14 H16, 1100 H14 H16, 5005 H14
● Type: Coil roll
● Application: Industrial insulation jacketing, cover,
● insulation protective jacketing
● Thickness: 0.3-1.5mm
● Width: 914mm, 1000mm, 1219mm
● Length: 20, 25,30, 60, 90m per roll or as per clients
● Surface Treatment: Stucco Embossed
● Moisture barrier: polysurlyn, craft paper
● Certificate: ISO9001, GB/T3880, ASTM B209
● Packaging: packed in carton or coil in wooden pallet
● Delivery time: 25-45 days
● Minimum order quantity: 5 tons
Features and Applications of aluminum jacket stucco embossed
Features of aluminum jacket stucco embossed
1.Customized packaging solutions for extended shelf life
2.Excellent barrier against moisture, oxygen & odour
3.Excellent mechanical properties even at low thickness
4.High burst strength and puncture resistant.
Application of stucco embossed aluminum jacket
Aluminum jacketing is recommended for insulated piping, tanks and vessels less than 8 feet in diameter. Aluminum Jacketing is recommended for use in all of the following insulation system applications:
● Standard outdoor use on all pipe, vertical tank insulation systems up to 8 ft outer diameter, and all horizontal tanks
● Indoor insulation system applications up to 8 ft outer diameter where increased damage resistance is desired.
SIZE CHART of aluminum jacketing stucco
| Alloy | Temper | Thickness (inch) | Thickness (mm) | Width(mm) | Length(m) | Suggested Application | |||
| 1100, 1060, 3003, 3105, 5005 | H14,H16 | 0.012 | 0.3 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD below 36"(914mm) insulated pipe lines. | |||
| 0.016 | 0.4 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD below 36"(914mm) insulated pipe lines | |||||
| 0.020 | 0.5 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD below 36"(914mm) insulated pipe lines | |||||
| 0.024 | 0.6 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | OD 36"-8′ (914mm-2.43m) insulated pipe lines&equipment | |||||
| 0.032 | 0.8 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | special applications where extra thickness and protection is required, such as fabricated tank head covers and other special fabrications. | |||||
| 0.040 | 1.0 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | special applications where heavy mechanical is required. | |||||
| 0.050 | 1.2 | 914, 1000, 1219 | 20, 25,30, 60, 90, coil | flat ducts or precipitators. Also recommended for areas subject to high wind conditions | |||||
Classification of stucco embossed aluminium cladding
Stucco embossed Aluminum Jacketing
1, Increase its strength and ductility.
2, Extend its lifetime.
3, Better bribability, durability.
4, Effectively reduce rowing.
5, Not cause strong light reflecting.
6, Have a good vision effect.
Stucco embossed Aluminum Jacketing
Poly surlyn : Dupont surlyn, 3 mil thickness(76um)
Color: Bule
Aluminum sheet thickness : 0.3-1.5mm
Package: 20-30m/roll in one carton or big coil
Advantage: water-proof, prevent oxidation
Embossed Aluminum jacketing laminated with kraftpaper
Advantage: water-proof, prevent oxidation
Kraft-paper: 166g/m2
Color: khaki
Aluminum sheet thickness: 0.3-1.5mm
Package: 20-30m/roll in one carton or big coil
Advantage: water-proof, prevent oxidation
Send A Message
Hot Products
Bottle Cap Aluminum
Thickness:0.012-0.5mm
Typical Application: wine bottle caps, medicine bottle caps, cosmetic bottle caps, beverage aluminum bottle caps
Aluminum Sheet For Anodizing
Thickness:0.2-7mm
Typical Application: Rail transit, ship transportation, electronic appliances, construction, engineering molds.
CTP/ PS Aluminum Substrate
Thickness:0.1-500mm
Typical Application: superb colour business printing and UV ink printing
Aluminum for Battery Tray
Thickness:1.0--12mm
Typical Application: New energy power battery
Henan Mingtai AL. Industrial Co.. Ltd.© All rights reserved Privacy