Canada 5454 h32 aluminum plate for automobile engines

The automobile’s heart lies in its engine, comprising a substantial portion of the vehicle’s weight, typically ranging from 20% to 30%. At the epicenter of this engine is the engine block, constituting 25 to 35% of its overall weight. To lighten the car’s load, aluminum alloy materials offer a viable solution. Specifically, Canada 5454 aluminum plates are preferred for engine covers due to their remarkable properties. These plates boast high strength, superior corrosion resistance, and exceptional plasticity. Notably, the Canada 5454 H32 aluminum plate stands out for its ease in stamping and forming, offering unparalleled practicality and making it an ideal choice for automotive engine production.

The 5454 aluminum plate, a star product from Mingtai Aluminum, boasts superior craftsmanship, resilience against rigorous corrosive conditions, and exceptional rust-resistant properties. Its strength stands tall, surpassing 5052 aluminum plate by approximately 20%. The product quality surpasses national benchmarks, attaining an esteemed A+ rating. Beyond automotive engines, the 5454 aluminum plate is a preferred choice for automobile wheel production. Moreover, it finds extensive applications in pressure vessels, marine installation pipelines, oil tankers, and various other industries.


Specification of 5454 h32 aluminum plate for automobile engines

Alloy Temper Thickness(mm) Width(mm) Length (mm)
5454 O,H*2,H*4,H*6,H*8,H111,H112,H114,H116,H321,etc. 0.15-600 100-2650 500-16000
Standards GB/T 3880, EN14286, EN485, ASTM B209, or according to customer’s special requirements
Application Fuel tanks, oil tanker body, marine facility pipelines, automobile engines,automobile wheels, etc.


Chemical composition of 5454 h32 aluminum plate for automobile engines

Alloy Si Fe Cu Mn Mg Cr Ni Zn Ti Zr Al
5454 0.25 0.4 0.1 0.50-1.00 2.40-3.00 0.05-0.20 0.25 0.2 Remainder


Mechanical properties of 5454 h32 aluminum plate for automobile engines

Temper Specified thickness (mm) Tensile strength Yield strength Rp0.2(MPa) Elongation
Bending Radius Hardness
Rm(Mpa) Min. A50mm A 180° 90° HBW
H22/H32 0.2-0.5 250-305 180 5 1.5t 0.5t 74
0.5-1.5 250-305 180 6 1.5t 1.0t 74
1.5-3.0 250-305 180 7 2.0t 2.0t 74
3.0-6.0 250-305 180 8 2.5t 74
6.0-12.5 250-305 180 10 4.0t 74
12.5-40.0 250-305 180 9 74

Henan Mingtai AL. Industrial Co.. Ltd.© All rights reserved