2A12 Aluminum Round Bar

Leave a message for quotation

The Introduction of 2A12 aluminum round bar

2A12 aluminum bar, also known as high-strength duralumin, is a typical duralumin alloy in the AL-Cu-Mg system and can be strengthened by heat treatment. At the same time, its composition is relatively reasonable, and its overall performance is good. It is a hard aluminum material produced in many countries, and its usage is the largest among hard aluminum materials. It has certain heat resistance and can be used as working parts below 150°C. Widely used in aircraft structures, rivets, truck wheels, propeller components, and other structural parts. However, caution is required when using gas and TIG welding because it tends to form intergranular cracks. This alloy has good machinability after cold work hardening, but its corrosion resistance is not high, so anodizing and painting methods are usually required to improve its corrosion resistance.

The Product Features of 2A12 aluminum Round Bar

● High strength: 2A12 aluminum bar has high tensile strength and yield strength, can withstand large loads, and is suitable for manufacturing structural parts that need to withstand heavy objects and pressure.

● Good plasticity: 2A12 aluminum bar has good plasticity before heat treatment and can be used for plastic processing, such as stretching, bending, etc.

● Good corrosion resistance: Compared with other metal materials, aluminum has good corrosion resistance and can resist the erosion of air, water and acid.

● Low density: Aluminum has a low density, which can reduce the weight of structural parts and facilitate transportation and use..

● Good conductivity: Aluminum is a good conductive material and can be used to manufacture structural parts that need to conduct electricity.

The Product Specification of 2A12 aluminum round bar

Alloy

2A12 aluminum round bar

Temper

O, T1, T2, T3, T4, H12, H14, H26, H112, etc.

Diameter

30-2000mm

Length

(mm)

customized as required

MOQ

5 TON

Chemical composition of 2A12 aluminum round bar

Element Cu Si Fe Mn Mg Zn Cr Ti Al
Content 3.8-4.9 ≤0.5 0.0-0.5 0.3-0.9 1.2-1.8 ≤0.3 - ≤0.15 Remain

Mechanical properties of 2A12 Aluminum Round Bar:

Tensile Strength MPa Yield strength MPa Elongation%
≥472 ≥325 10

Send A Message

Hot Products

5083 Aluminum Sheet

Thickness: 0.5-500mm

Typical Application: Shipbuilding, Pressure Vessels and General maritime fabricated products, LNG storage tank, flange material, etc.

5754 Aluminum Sheet

Thickness: 0.1-500mm

Typical Application: tread plates, vehicle bodies, fishing equipment, shipbuilding, rivets

2024 Aluminum Sheet

Thickness: 20-200mm

Typical Application: molds, rivets, truck wheels, and other various structural parts

3003 Aluminum Sheet

Thickness: 0.1-500mm

Typical Application: heat sinks, radiators, power battery enclosures, automotive heat shields

Henan Mingtai AL. Industrial Co.. Ltd.© All rights reserved

Privacy