5052 Aluminum Round Bar
The Introduction of 5052 aluminum round bar
5052 Aluminum Bars are made with an alloy mixture of Aluminum with chromium and magnesium mixed in the ratio of 2.5% magnesium and 0.25% chromium. The Magnesium content helps the bars to have better performance at low-temperature applications and the chromium content helps the ASTM B221 Aluminum 5052 Bars to have better resistivity against corrosion in various corrosive environments.
The Product Features of 5052 aluminum Round Bar
● 5052 aluminum has excellent corrosion resistance and is widely used in marine environments, chemical storage containers, and tank manufacturing.
● 5052 aluminum is lightweight, high-strength, and easy to weld, suitable for aerospace, fuel pipes, ships, car bodies, buildings, and sheet metal parts.
● 5052 aluminum can enhance its performance through heat treatment, suitable for applications requiring customized performance, such as storage tanks, and pressure vessels.
● 5052 aluminum has fatigue resistance and is suitable for applications that require long-term stress resistance, such as aircraft components, gear shafts, and wheels.
● 5052 aluminum is a non-magnetic material suitable for applications that do not allow magnetic interference, such as electronic products and electrical manufacturing.
● 5052 aluminum is easy to cold work and suitable for manufacturing complex shaped components, such as road signs, containers, pedals, and building panels.
The Product Specification of 5052 aluminum round bar
| Category | Specification | Details / Typical Value |
|---|---|---|
| Standard | GB/T (China) | GB/T 3191-2019 |
| Equivalent Standards | ISO / EN / ASTM | 5052 (ISO/Aligned), EN AW-5052, AA 5052 |
| Chemical Composition | Mg | 2.2 - 2.8 % |
| Cr | 0.15 - 0.35 % | |
| Si | ≤ 0.25 % | |
| Fe | ≤ 0.40 % | |
| Cu | ≤ 0.10 % | |
| Zn | ≤ 0.10 % | |
| Mn | ≤ 0.10 % | |
| Al | Balance | |
| Temper | Common Tempers | H32, H34, H36, H38, O |
| Diameter Range | Common Size | 30 mm - 200 mm (varies by mill) |
| Mechanical Properties (H32 Temper) | Tensile Strength | 210 - 260 MPa |
| Yield Strength (0.2% Offset) | ≥ 160 MPa | |
| Elongation (δ5) | ≥ 8 % | |
| Mechanical Properties (O Temper) | Tensile Strength | 170 - 240 MPa |
| Yield Strength (0.2% Offset) | ≥ 70 MPa | |
| Elongation (δ5) | ≥ 18 % | |
| Key Characteristics | Excellent Corrosion Resistance, Moderate Strength, Good Formability, Non-Heat-Treatable |
Send A Message
Hot Products
2A14 Aluminum Round Bar
2A14 aluminum round bar is a high-strength, heat-treatable aluminum alloy, belonging to the Al-Cu-Mg series, known for excellent strength, good cutting, and welding performance in its quenched and aged state.2A12 Aluminum Round Bar
2A12 aluminum bar, also known as high-strength duralumin, is a typical duralumin alloy in the AL-Cu-Mg system and can be strengthened by heat treatment. At the same time, its composition is relatively reasonable, and its overall performance is good.5052 Aluminum Round Bar
5052 Aluminum Bars are made with an alloy mixture of Aluminum with chromium and magnesium mixed in the ratio of 2.5% magnesium and 0.25% chromium. The Magnesium content helps the bars to have better performance at low-temperature applications and the chromium content helps the ASTM B221 Aluminum 5052 Bars to have better resistivity against corrosion in various corrosive environments.6063 Aluminum Round Bar
6063 aluminum bars belong to low-alloy Al-Mg-Si series high plasticity alloys, known for their excellent surface finish, with excellent extrusion performance, good corrosion resistance and comprehensive mechanical properties, and are susceptible to oxidization discoloration.Henan Mingtai AL. Industrial Co.. Ltd.© All rights reserved Privacy