6082Aluminum Round Bar
The Introduction of 6082 aluminum round bar
The 6082 aluminum rod is a medium-strength structural alloy that belongs to the 6000 series, offering excellent corrosion resistance.
Compared to the 6061 alloy of the same series, the 6082 aluminum rod includes manganese, which controls the grain structure and forms a stronger alloy. As a result, it has higher strength and has replaced 6061 aluminum rods in many applications.
The Product Features of 6082 aluminum Round Bar
● EN AW-6082 aluminum bar is a medium-strength alloy with high tensile strength and hardness. This makes it perform well in applications that require handling larger loads and stresses.
● 6082 aluminum bar has excellent corrosion resistance, making it suitable for applications that work in wet and corrosive environments. This property makes it widely used in marine and chemical industries.
● 6082 aluminum bar exhibits good machinability in the heat-treated state, and it can be processed through cutting, drilling, milling, and other methods. However, due to its higher strength and hardness, it may require more machining force compared to other aluminum alloys.
● 6082 aluminum bar has good weldability and can be connected through various welding methods, including TIG welding, MIG welding, etc. However, proper welding parameters and processes need to be followed to ensure quality.
● 6082 aluminum bar can be further strengthened through heat treatment to meet the requirements of different applications.
The Product Specification of 6082 aluminum round bar
| Category | Specification | Details / Typical Value |
|---|---|---|
| Standard | EN / ISO (Europe) | EN 573-3 / EN 755-2 |
| Equivalent Standards | ASTM (USA) / GB/T (China) | AA 6082 / GB/T 3191-2019 (6A02) |
| Chemical Composition | Si | 0.7 - 1.3 % |
| Fe | ≤ 0.50 % | |
| Cu | ≤ 0.10 % | |
| Mn | 0.40 - 1.0 % | |
| Mg | 0.6 - 1.2 % | |
| Cr | ≤ 0.25 % | |
| Zn | ≤ 0.20 % | |
| Ti | ≤ 0.10 % | |
| Al | Balance | |
| Temper | Common Tempers | T6, T651, O |
| Diameter Range | Common Size | 30 mm - 200 mm (varies by manufacturer) |
| Mechanical Properties (T6 Temper) | Tensile Strength | ≥ 310 MPa |
| Yield Strength (0.2% Offset) | ≥ 260 MPa | |
| Elongation (δ5) | ≥ 8 % | |
| Mechanical Properties (O Temper) | Tensile Strength | ~150 MPa |
| Yield Strength (0.2% Offset) | ~80 MPa | |
| Elongation (δ5) | ≥ 14 % | |
| Key Characteristics | High Strength, Good Machinability, Excellent Corrosion Resistance |
Send A Message
Hot Products
2A12 Aluminum Round Bar
2A12 aluminum bar, also known as high-strength duralumin, is a typical duralumin alloy in the AL-Cu-Mg system and can be strengthened by heat treatment. At the same time, its composition is relatively reasonable, and its overall performance is good.2A14 Aluminum Round Bar
2A14 aluminum round bar is a high-strength, heat-treatable aluminum alloy, belonging to the Al-Cu-Mg series, known for excellent strength, good cutting, and welding performance in its quenched and aged state.5052 Aluminum Round Bar
5052 Aluminum Bars are made with an alloy mixture of Aluminum with chromium and magnesium mixed in the ratio of 2.5% magnesium and 0.25% chromium. The Magnesium content helps the bars to have better performance at low-temperature applications and the chromium content helps the ASTM B221 Aluminum 5052 Bars to have better resistivity against corrosion in various corrosive environments.6063 Aluminum Round Bar
6063 aluminum bars belong to low-alloy Al-Mg-Si series high plasticity alloys, known for their excellent surface finish, with excellent extrusion performance, good corrosion resistance and comprehensive mechanical properties, and are susceptible to oxidization discoloration.Henan Mingtai AL. Industrial Co.. Ltd.© All rights reserved Privacy